description interop2: bgp community addrouter r1 int eth1 eth 0000.0000.1111 $per1$ ! vrf def v1 rd 1:1 exit int eth1 vrf for v1 ipv4 addr 1.1.1.1 255.255.255.0 ipv6 addr 1234::1 ffff:: exit int lo0 vrf for v1 ipv4 addr 2.2.2.1 255.255.255.255 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff exit route-map rm1 sequence 10 act deny match stdcomm 1234:4321 sequence 20 act permit exit router bgp4 1 vrf v1 address uni local-as 1 router-id 4.4.4.1 neigh 1.1.1.2 remote-as 1 neigh 1.1.1.2 route-map-in rm1 neigh 1.1.1.2 send-comm both red conn exit router bgp6 1 vrf v1 address uni local-as 1 router-id 6.6.6.1 neigh 1234::2 remote-as 1 neigh 1234::2 route-map-in rm1 neigh 1234::2 send-comm both red conn exit ! addpersist r2 int eth1 eth 0000.0000.2222 $per1$ ! interface loopback0 ipv4 addr 2.2.2.2 255.255.255.255 ipv6 addr 4321::2/128 exit interface loopback1 ipv4 addr 2.2.2.3 255.255.255.255 ipv6 addr 4321::3/128 exit interface loopback2 ipv4 addr 2.2.2.4 255.255.255.255 ipv6 addr 4321::4/128 exit interface gigabit0/0/0/0 ipv4 address 1.1.1.2 255.255.255.0 ipv6 address 1234::2/64 no shutdown exit route-policy rp1 if destination in (2.2.2.3/32, 4321::3/128) then set community (1234:4321) else set community (1234:1234) endif pass end-policy router bgp 1 address-family ipv4 unicast redistribute connected route-policy rp1 address-family ipv6 unicast redistribute connected route-policy rp1 neighbor 1.1.1.1 remote-as 1 address-family ipv4 unicast neighbor 1234::1 remote-as 1 address-family ipv6 unicast root commit ! r1 tping 100 10 1.1.1.2 vrf v1 r1 tping 100 10 1234::2 vrf v1 r1 tping 100 60 2.2.2.2 vrf v1 sou lo0 r1 tping 100 60 4321::2 vrf v1 sou lo0 r1 tping 0 60 2.2.2.3 vrf v1 sou lo0 r1 tping 0 60 4321::3 vrf v1 sou lo0 r1 tping 100 60 2.2.2.4 vrf v1 sou lo0 r1 tping 100 60 4321::4 vrf v1 sou lo0